Looking for Answers about this Product?

Customer Questions & Answers for
Wickes 110mm Black Soil Pipe Strap On Boss

Using this strap on boss allows you to add a waste pipe to the soil pipe.
Customer Questions & Answers:
5 Questions
 | 
5 Answers
Overall Rating:
4.667 out of 5
4.7
out of
5
Product Details

Questions & Answers for Wickes 110mm Black Soil Pipe Strap On Boss

Question
How do you fit the plastic pipe into these?
Once this is fitted to the soil stack, what seals the incoming (40 or 32mm) pipe? Should this have a rubber seal of some kind, or does the pipe just sit loose in the plastic?
Asked 5 years, 5 months ago
By
nsk1974
on Wickes 110mm Black Soil Pipe Strap On Boss
0points
0out of 0found this question helpful.
2 Answers
Answers
Answer 1
Mine came with a rubber bung in the pipe (as per photo) so the 40mm pipe simply pushes in to form a seal.
Answered 4 years, 8 months ago
By
Kieran
 - Taunton
0points
0out of 0found this answer helpful.
Answer 2
Our Soil Strap on boss can be used to connect push fit waste pipes to the 110mm soil pipe in conjunction with either of the following boss adaptors;

32mm waste pipe – product code 431950

40mm waste pipe – product code 431951

For further assistance, please contact our Customer Service Team for further assistance with your query.

https://www.wickes.co.uk/pcat/contact
Answered 5 years, 4 months ago
By
WickesTeam
0points
0out of 0found this answer helpful.
Question
What size drill do I need to fit the boss adaptor to a plastic soil pipe
For a 32mm waste pipe
Asked 5 years, 8 months ago
By
ChrisT
on Wickes 110mm Black Soil Pipe Strap On Boss
0points
0out of 0found this question helpful.
1 Answer
Answers
Answer 1
You will require a 54mm hole cutter. Once piping has been connected, please ensure that they are jointed together with solvent weld.
Answered 5 years, 8 months ago
By
WickesTeam
0points
0out of 0found this answer helpful.
Question
What do I need to drill acast iron soil pipe for 32mm strap on boss
Asked 5 years, 7 months ago
By
Anonymous
on Wickes 110mm Black Soil Pipe Strap On Boss
0points
0out of 0found this question helpful.
1 Answer
Answers
Answer 1
We would recommend using our Hole Saw Set, Product code 500584. Please remember to drill at a low setting to ensure that the cast iron does not crack.
Answered 5 years, 6 months ago
By
WickesTeam
0points
0out of 0found this answer helpful.
Question
hi, want to add on a 40mm boss to my cast iron soil pipe, what size 0f diameter holesaw should i use, how would i seal it, thank you
Asked 5 years, 5 months ago
By
weeb
 - caithness
on Wickes 110mm Black Soil Pipe Strap On Boss
0points
0out of 0found this question helpful.
1 Answer
Answers
Answer 1
The correct hole saw required is between a 50mm to a 54mm depending on your Cat Iron Piping. To seal the soil strap on boss, to your Cast Iron Soil pipe you will need to solvent weld the Cast Iron pipe to the boss, once set then strap on the strap to secure the boss.
Answered 5 years, 4 months ago
By
WickesTeam
0points
0out of 0found this answer helpful.
Question
What size hole do I drill into a 110mm diameter plastic soil stack before I glue on the 40mm boss.
Should the boss come with a nut and bolt to tighten the strap that goes around the back of the soil pipe as all the ones in our local store do not.
Asked 4 years, 11 months ago
By
Anonymous
 - St Albans
on Wickes 110mm Black Soil Pipe Strap On Boss
0points
0out of 0found this question helpful.
0 Answers
Answers
This question currently has no approved answers.
1 of 1
Product Details